Bechtel Corporation Jobs

Job Information

Bechtel Corporation Senior I&C Design Engineer, PCAPP (228816) in Pueblo, Colorado

  • Requisition ID: 228816

  • Position Title: Senior I&C Design Engineer, PCAPP (228816)

  • Project: PCAPP

  • Location: Pueblo, CO

  • Relocation Authorized: National - Family

  • Work Authorization: Possess right to work in the US without sponsorship

  • US Citizenship Required: Yes

  • Surety Program: UAP

  • Other Requirements: Security Investigation, Drug/Alcohol Testing and Medical Examination, Adherence to AR (Army Regulation) 50-60, random drug and alcohol testing, Badge requirements

Project Background

The Pueblo Chemical Agent-Destruction Pilot Plant (PCAPP) will safely destroy 2,611 tons of mustard agent in mortar rounds and artillery projectiles stored at the U.S. Army Pueblo Chemical Depot (PCD) approximately 25 miles from Pueblo, Colorado. Neutralization followed by biotreatment is the technology selected by the Department of Defense to destroy the Pueblo chemical weapons stockpile. The PCAPP plant began the operations and munition destruction phase as of September 2016.

Candidates for unescorted access to the Chemical Limited Area must successfully clear National Agency Check with Local Check (NACLC). All employees are subject and agree to random drug and alcohol testing as a condition of employment. Must be physically fit and able to work safely at an operating plant. Eligible applicants must be a US Citizen and successfully go through a government screening process. Based on project goals and objectives, candidates established within our local community are desirable.

Role Overview

The Pueblo Chemical Agent-Destruction Pilot Plant (PCAPP) is looking for a Senior I&C Design Engineer at the Pueblo, CO location. This position will report to the Electrical and I&C Engineering Group Supervisor at the PCAPP project. Reviews and coordinates documents with suppliers, other disciplines and customers. Coordinates technical issues with Operations and Cognizant Systems Engineers. Additionally, provides assistance to Maintenance in the field. Proficient with basic engineering deliverables such as drawings, specifications, and Distributed Control System (DCS)/ Programmable Logic Controller (PLC) configurations. Knowledgeable of major regulations and industry codes and standards applicable to instrumentation and controls. Properly interprets and applies codes & standards and customer design requirements in the preparation of Control Systems design products.

This is a long-term assignment with a 4-10s schedule. The work hours are from 6:30am 4:30pm Monday Thursday. This position may require additional overtime hours as deemed necessary

Principle responsibilities include, but are not limited to:

  • Develop/modify Piping & Instrument Diagrams, Instrument Installation details and Logic Diagrams.

  • Specify field instrumentation requirements for procurement, installation, and troubleshooting.

  • Contributes to maintaining the project’s instrument database using automated tools and has knowledge of the applicability of information to be populated in the instrument database.

  • Establish and maintain set points and operating limits for facility controls.

  • Evaluate equivalent models for field instrumentation.

  • Participates in field walkdowns.

  • Conducts document and design checking as required.

  • Achieves work process improvement and promotes continuous work process improvement.

  • Champion nonproprietary electronic data interchange and integrate automation technology where practical.

  • Demonstrate leadership qualities with emphasis on continuous improvement and team building, and interpersonal communication skills. Provide guidance on instrument selection to expand the skillsets of peers.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Day to day responsibilities may include support to operations, maintenance, operations support, acquisitions, safety, and/or quality

Basic Qualifications:

  • BS degree in Mechanical, Electrical, Chemical, Computer or Electro-Mech engineering from an accredited institution with 6 years of relevant experience.

  • In lieu of a degree, must possess 10 years of relevant engineering experience.

  • Must be a United States citizen (Dual citizenship will be subjected to project’s approval).

  • Must be able to obtain and maintain any security clearances required for this position according to Army Regulation 50-6 (Chemical Surety). *

Minimum Qualifications:

  • Must be physically fit and able to work safely at a construction site.

  • Must be able to work a flexible schedule and/or additional working hours during Key Project initiative time periods.

  • Distributed Control System (DCS)/ Programmable Logic Controller (PLC) configurations experience along with experience integrating PLCs into a DCS system.

  • Working knowledge of VISIO CADD and/or PDS 2D.

  • Experience with Microsoft office programs, VISIO, and other common computer program.

  • Excellent listening, oral and written communication, planning and organizational skills.

Preferred Qualifications:

  • MS degree in Mechanical, Electrical, Chemical, Computer or Electro-Mech engineering from an accredited institution with 4 years of relevant experience.

  • Experience with Agent Monitoring, Electronic Security and operations Closed-Circuit TV (CCTV) systems.

  • Basic familiarity with Engineering field experience supporting installation or troubleshooting of instrumentation.

  • Experience working on a Department of Defense Project.

  • Experience working within an engineering group in an operating facility.

This project is subject to the Army Regulations (AR50-6 Chemical Surety) which governs persons performing work under the Chemical Personnel Reliability Program (CPRP) and Unescorted Access Program (UAP). Depending on the work performed and the access granted a government security investigation and other physical requirements such as respirators may be mandated. Eligibility to be placed in a CPRP or UAP position requires US citizenship.

The following Surety Program marked with an “x” apply to this job:

_____ None / No Program

_____ This position is designated as a Chemical Duty Position and is subject to the requirements of the Chemical Personnel Reliability Program (CPRP). As a condition of employment, candidates and incumbents must favorably complete a series of screenings included but not limited to a personnel security investigation, urinalysis testing, medical exam and respiratory screening, and must meet and maintain personnel suitability and reliability requirements established by Army Regulations.

__X__ This position is designated as an Unescorted Access Position (UAP). As a condition of employment, candidates and incumbents must favorably complete a series of screenings included but not limited to a personnel security investigation, urinalysis testing, respiratory screening and must meet and maintain personnel suitability and reliability requirements established by Army Regulations

Shaping tomorrow together

Bechtel is one of the most respected global engineering, construction, and project management companies. Together with our customers, we deliver landmark projects that foster long-term progress and economic growth. Since 1898, we’ve completed more than 25,000 extraordinary projects across 160 countries on all seven continents. We operate through four global businesses: Infrastructure; Nuclear, Security & Environmental; Oil, Gas & Chemicals; and Mining & Metals. Our company and our culture are built on more than a century of leadership and a relentless adherence to our values, the core of which are safety, quality, ethics, and integrity. These values are what we believe, what we expect, what we deliver, and what we live.

www.bechtel.com at https://www.bechtel.com/

Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

DirectEmployers